Removal From Service, Disposal And Recycling; Technical Assistance - S&P CAS-900 M PD Manual De Instalacion Y Uso

• On the control panel, a red LED (Fig.4-b) lights up to indicate that the curtain is in operation.
• The infra-red remote control works at a maximum distance of 5 meters and must be facing the curtain control pa-
nel, where the receiver is located (Fig.4-a).
• Depending on the distance between the curtain and the wall and the height of the installation, it is possible to adjust
the defl ector angle of the air output (Fig.5), thus altering the direction of the airfl ow.
6. DOOR SENSOR
The air curtain incorporates as standard a magnetic sensor (not connected), to control the operation (ON/OFF) of
the air curtain. To be able to connect the sensor, access the back of the air curtain intake grill, where a cable with a
connector comes out of the control box (FIG.6).
The position of the magnets will determine whether the air curtain operates when the door is open or closed. THE
AIR CURTAIN WILL WORK WHEN THE MAGNETS (Fig 6 A-B) ARE SEPARATED. For correct operation, ensure that the
maximum separation between magnets, when they are together, is less than 10mm.
NOTE: To fi x the mobile magnet (Fig. 6 B) on a glass door, a double-sided adhesive patch is supplied. Before fi xing the
adhesive patch, make sure that the surface is clean and completely dry.
7. MAINTENANCE
WARNING: Do not carry out cleaning operations while the curtain is in operation.
These curtains do not require any special maintenance; however we do recommend the following:
• Keep the openings of the intake and outlet grills dust free. Clean them periodically with a dry cloth or with a vacuum
cleaner.
• Clean the outside of the curtain with a damp cloth (do not use abrasive detergents).
• The inside should be cleaned annually. In the interest of safety, this should be carried out by a technical specialist
or qualifi ed personnel.

8. REMOVAL FROM SERVICE, DISPOSAL AND RECYCLING

EEC legislation and our consideration of future generations mean that we should always recycle materials where
possible; please do not forget to deposit all packaging in the appropriate recycling bins. If your device is also labeled
with this symbol, please take it to the nearest Waste Management Plant at the end of its servicable life.

9. TECHNICAL ASSISTANCE

If technical assistance is required, or if you notice any anomaly in the equipment, visit www.solerpalau.com
to locate the nearest S&P customer service point, where you will be assisted as required.
Any operation on the equipment carried out by personnel other than those employed by S&P will invalidate
the guarantee.
S&P RESERVES THE RIGHT TO MAKE MODIFICATIONS TO THE PRODUCT WITHOUT PRIOR NOTICE.
10