Blaupunkt PG4000 Manual Del Usario página 10

Fig.17
1
In order to mount the gun more easily apply
lubricating grease liberally to the O-ring at the spray
attachment (Fig. 17, 1 )
MAINTENANCE
AIR FILTER
Attention! Never operate the device with the air filter soiled or missing, as dirt could be suck up and affect the operation
of the device. Always check the air filter before use.
• Disconnect the power plug.
Remove the screw (Fig.18, 1 ), put out of the air filter cover (Fig.18, 2 ) and air filter (Fig.18, 3 ).
•
• Clean or replace the filter depending on how dirty it is.
• Push the clean air filter in and re-install the cover of the air filter compartment.
i
NO-RETURN VALVE
If paint has entered the ventilation hose,
proceed as follows:
• Screw off the container, unscrew suction
tube with container seal. (Fig.19)
• Disconnect the no-return valve
(Fig.19, 2 ) from the ventilation hose
(Fig.19, 1 ). Clean all the parts carefully
CAUTION! The ventilation hose and
no-return valve are only solvent-resistant
to a limited extent.
Do not immerse in solvent, only wipe.
• Reconnect the no-return valve
and the ventilation hose.
• Assemble the container seal,
suction tube and container again.
Fig.18
1
Fig.19
2
1
2
C
M
T
N
f
C
t
A
S
T
o
p
E
(
P
1