Tabla de contenido
Idiomas disponibles
Idiomas disponibles
■
Dry-Dries the room. The air conditioner automatically
selects the temperature. The fan runs on Low speed only.
NOTE: Dry mode should not be used to cool the room.
A decrease or rise of up to 4
remote controller if you still feel uncomfortable.
06
■
Fan Only-Only the fan runs. Press FAN button to adjust
fan speed.
NOTE: Auto fan speed cannot be selected in Fan Only mode.
Heating-Heats the room. Press FAN to select the fan speed.
■
Press the up or down TEMP button to adjust the temperature.
-•
,.�
,.,,
..
....
SMART Mode
Press the SMART button,regardless If the unit is on or off, to set
temperature and fan speed automatically based on the actual
room temperature.
SMART
Operation mode and temperature are determined by indoor temperature.
With
Heater/Heat Pump
models
Indoor temperature
Operation mode
°
°
F (21
C) or below
70
°
°
70-73
F (21-23
C )
°
°
73-79
F (23-26
C )
°
°
Over 79
F ( 26
C )
Cooling only models
Indoor temperature
Operation mode
°
°
23
C (73
F) or below
°
°
23-26
C (73-79
F )
°
°
Over 26
C (79
F)
NOTE:Temperature, airflow and direction are controlled
automatically in smart mode. However, a decrease or rise of
°
°
up to 4
F (2
C) can be set with the remote controller
if you still feel uncomfortable.
,·11 ,,aU•JI· • 1•• t
Your feeling
Button
Uncomfortable
C)
because of
unsuitable air
FAN
flow volume.
Uncomfortable
C)
because of
unsuitable flow
SWING
direction.
°
°
F (2
C) can be set with the
..
Target temperature
°
72
F (22
HEATING
FAN ONLY
Room temperature decrease
DRY
4"F(2'C) after operate for
3 minutes
°
79
F (26
COOLING
Target temperature
FAN ONLY
Room temperature decrease
DRY
4'F(2'C) after operate for 3
minutes
°
26
C (79
COOLING
A
wEil]J
Adjustment
Indoor fan speed alternates among
High, Medium and Low each time
this button is pressed.
Press it once, the louver swings
to change airflow direction.
Press it again, swings stops.
SUPER
SUPER button is used to start or stop fast cooling or heating.
1. Press SUPER button. The air conditioner automatically
sets the fan speed to High and the temperature to 61
Fast heating operates at auto fan speed,changing the set
temperature automatically to 86
2. To turn off Super control, press any button on the remote
control or control panel except Timer On, Timer Off, Clock,
Dimmer,lfeel and Swing.
NOTE:
■
In the SUPER mode you can set airflow direction or timer.
■
SMART mode is not available in SUPER mode.
■
SUPER button is ineffective in SMART mode.
Fan Speed
1. Press FAN button, Choose desired fan speed.
°
C)
Auto ___. High___. Medium---. Low
■
Auto-Automatically controls fan speed depending on
current room temperature and temperature control
°
C)
setting.
NOTE: Auto fan speed cannot be selected in Fan Only
mode.
High for maximum fan speed
■
°
F)
Mid for normal fan speed
■
Low for minimum fan speed
■
14
°
°
C) .
F (30
SUPER
fast heating
fast cooling
�
�
�
�
"" ' ��
.. o ,4
r<,"'°
"' �
'
rO ..
" o �
'
°
°
F (16
C).
Tabla de contenido
Solución de problemas
