Installation In Vertical Sliding Windows - Hunter HPAC-08C150 Instrucciones De Uso E Instalación

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

NOTE:The
window installation kit can be used with vertical sliding windows between 18" and 50" wide.
Foal seal N
(Adhesive type-shorter)
Cut the foam seal M(adhesive type) & N
(adhesive type-shorter)to the proper
length,and attcah it to the window sash and
frame.
Vent
Panel
==�
Insert the vent panel assembly,including
extension panels.if needed, into the window
opening.Extend the extension panels,if used.

Installation In Vertical Sliding Windows

Foal seal M
(Adhesive type)
Extension panel
(if required)
Cut the foam seal A(Non-adhesive type) to the
window width.Stuff the foam seal A between
the glass and the window to prevent air and
insects from getting into the room.
f.fJ .,-
E or F
Install the Window-lock bracket with a E or F screw as
shown if you need. E screw is suitable for wood
window, F screw is suitable for metal window.
8
Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Hpac-10c150Hpac-12c150Hpac-125hc200

Tabla de contenido