Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Temperature
Press the PLUS button to raise the temperature. Press the
PLUS button once to increase the set temperature by 1
G
PLUS
Press the MINUS button to lower the temperature. Press the MINUS
button once to decrease the set temperature by 1
g
MINUS
NOTE:
In the Cooling mode, the temperature can be set between
°
°
°
F (16
C and 30
61
F and 86
In Fan Only mode, the temperature cannot be set.
Insert the Batteries
1. Remove the battery cover along the arrowed direction.
2. Insert new batteries making sure that the(+) and(-) of
battery are matched correctly.
3. Re-attach the cover by sliding it back into position.
NOTE:
■
Use the included 2 standard AM(1.5volt) batteries. Do not use
rechargeable batteries. Replace batteries with new ones of the same
type when the display becomes dim, or after 6 months.
■
If you reload batteries after removing the old ones, previous settings will
be lost.
■
Do not recharge non-rechargeable batteries.
■ Do not mix different types of batteries such as alkaline, carbon-zinc, or
rechargeable batteries.
■
Do not mix old and new batteries.
■
Batteries are to be inserted with the correct polarity.
■
Exhausted batteries are to be removed from the product.
Storage tip
The clip on the back of the unit can be used to store the remote
control.
°
°
F (1
°
°
F (1
C).
°
C).
Using the Remote Control
To change the temperature display between
press both the Plus and Minus Adjust buttons at the same time.
C).
ION (Optional)
Press the ION button to start or stop the Plasma Generator.
When the ION indicator light of the appliance flashes, the
Plasma Generator will turn on.
How to Use
To operate the room air conditioner, aim
the remote controller to the signal receptor.
The remote control will operate the air
conditioner at a distance of up to 23' (7m) when
pointing at signal receptor of the air conditioner.
Signal receptor
■
12
°
°
C and
F
Tabla de contenido
Solución de problemas
