FITFIU FITNESS GYM-100 Manual Usuario página 33

STEP 3
1. Place the Guiding Tube (05) into the Bridge
Tube (08) and tighten by X2 Flat Washer (33)
and X2 Hex Head Bolt (22).
2. Attach the Bridge Tube (08) to the Upright
Support Tube (02) and tighten by X2 Hex
Head Bolt (30), X4 Flat Washer (34) and X2
Nylon Nuts (38).
STEP 4
1. Attach the Seat Support Tube (06) to the
Upright Support Tube (02), tighten by X2 hex
Head Bolt (30), X4 Curve Washer (34) and
X2 Nylon Nuts (38).
2. Attach Backrest Cushion (57) into Upright
Support Tube(02), tighten by X2 Hex Head
Bolt (25) and X2 Flat Washer (34) through the
thread holes on the Backrest Cushion (57).
3. Attach the seat (58) to Seat Support Tube(06)
tighten by X2 Hex Head Bolt (24) and X2 Flat
Washer(34) through the thread holes on the
back side of Seat (58).
4. Screw-in the Small Rubber Stopper (52) into
the front side of Seat Support Tube (06).
5. Attach the Leg Curve Tube (07) to the front
side of Seat Support Tube (06), tighten by
X1 Hex Head Bolt (29), X2 Flat Washer (35)
and X1 Nylon Nut (39).
6. Attach the Foam Tube for Leg Curl (15) into
the holes on Leg Curl Tube (07) and front/
upper bracket of Seat Support Tube (06).
7. Attach the Foam for Leg Curl Tube (54) onto the
2 sides of each Foam Tube for Leg Curl (15).
33
GYM-100
EN