Dil Switch Setting; Address Assignment - Festo VTSA-ASI-4E4A-Z Serie Manual De Instrucciones

3.3 DIL switch setting

By means of the 2-way DIL switch you can define whether
or not the valves are to be supplied via the additional
power supply. Proceed as follows when setting the DIL
switches:
1. Pull off the sub-base aJ (Dismantling the sub-base
see section 3.2).
2. Carefully remove the cover
If necessary, unlock the clips on the narrow sides,
e.g. with the aid of a screwdriver.
3. Set DIL switch
4. Refit the cover and the sub-base in the reverse
sequence (Mounting the sub-base see section 3.2).

3.4 Address assignment

Before connecting to the AS-Interface bus: assign an
unused address to the slave.
Setting
Without additional power
supply
With additional power supply
1)
black = switch setting
(only settings represented are permitted)
22
7
6
.
DIL switch setting
ON
ON
1.1 1.2
2.1 2.2
ON
ON
1.1 1.2
2.1 2.2
Festo VTSA-ASI-...-4E4A-Z 1108a English
from the housing.
1)
1.1, 1.2: Off
2.1, 2.2: On
1.1, 1.2: On
2.1, 2.2: Off