Tabla de contenido
Idiomas disponibles
Idiomas disponibles
CAUTION
: ALWAYS FOLLOW THE CHEMICAL MANUFACTURER'S DIRECTIONS, AND THE HEALTH AND HAZARD WARNINGS.
Do not add chemicals while the pool is occupied. This can cause skin or eye irritation. Concentrated chlorine solutions can damage the pool liner. In no event is
Polygroup
, our buyer/retailers, or any other party liable for costs associated with the loss of pool water, chemicals, or water damage. Keep spare filter cartridges on
®
hand. Replace cartridges every two weeks. We recommend the use of Polygroup
Pump or other accessories, visit our website at support.polygroupstore.com or call Polygroup
EXCESSIVE RAIN: To avoid damage to the pool and overfilling, immediately drain rain water that causes the water level to be higher than the FILL LINE.
How to Drain Your Pool and Long-Term Storage
1. . Check local regulations for specific directions regarding disposal of swimming pool wat .
2. . Remove the protective foam ring on the drainage ca
3. . Follow these steps for water drainag
a) Turn the drain cap
counterclockwise
4. . Place the other end of the garden hose in an area where the water can be safely drained away from the house and other nearby structure
5. . When the water stops draining, start lifting the pool from the side opposite to the drain valve to drain any remaining water and empty the pool complete .
6. After drainage, lock the drain valve and close the drain cap.
NOTE: NEVER step on the drain valve
7. . Deflate the top ring completely and remove all connecting parts (if there are any
8. . Be sure that the pool and all parts are completely dry before storage Air-dry the liner in the sun completely before folding (see drawing 1). Sprinkle some
talcum powder to prevent the vinyl from sticking together and to absorb any residual moisture.
9. . Create a square shape. Starting at one side, fold one-sixth of liner into itself twice. Do the same on the opposite side (see drawing 2 & 3).
10. 0. Once you have created two opposing folded sides, simply fold one over the other like closing a book (see drawin 4 & 5).
11. . Fold the two long ends to the middle (see drawin 6).
12. 2. Fold one over the other like closing a book, and finally compact the liner (see drawi 7).
13. 3. Store the liner and accessories in a
14. The original packing can be used for storage.
1
4
c) ) Flip the drain c
b) ) Return the dra
and reinsert it to
cap from the valve
the drain valve
a) ) Flip the drain c
and reinsert it to
the drain valve
, temperature-controlled storage location above 32°F (0°C) and below 104°F (40°C).
Filter Pump with all of our aboveground pools. To purchase a Polygroup
®
Customer Service.
®
2
1
d) ) Push and turn t
drain cap clockwise
for about a quarter
turn (90
) to unlock
o
2
1
b) ) Push and turn the dra
c) ) Close the drain c
cap counterclockwise
for about a quarter
turn (90
) to lock
o
2
5
- 18 -
e) The drain valve is
f) Attach a 5/8" garden
now open, water will
hose to the drain valve
begin to flow out.
3
6
Filter
®
7
Tabla de contenido
