Vetus BMON Manual De Manejo Y Instrucciones De Instalación página 16

1 Introduction
The Vetus battery monitor can be used to measure the charge
condition of the battery and also, while discharging, the time
remaining before the battery will be completely discharged.
The following functions can be read:
- the voltage
- the charge or discharge current
- the charge condition of the battery
- the time limit before the battery is completely discharged.
A number of alarms can also be set.
The battery monitor can be connected to both a 12 Volt and a 24
Volt system, with negative earthed or earth free (2 pole).
16
9.0422
2 Installation
2.1 Meter
Click the round or square finishing ring onto the meter. Make a
hole in the panel and fit the meter as shown in the drawing.
* Necessary fitting depth
Battery monitor