Kohler K-13142 Guia De Instalacion página 15

12. Supply Connections
Install the bidet using the bidet manufacturer's instructions.
Connect the supply tubes to the handle valve (inlets) and then the
supply stops. (Left is hot - right is cold.)
Tighten all connections.
13. Installation Checkout
Connect the tailpiece and P-trap (as needed).
Ensure that all connections are tight.
Open the drain.
Turn on the main water supply and check for leaks. Repair as
needed.
Open both hot and cold valves and run water through the spout
for about a minute to remove debris. Check for leaks. Turn valves
off.
Turn off the water.
Kohler Co.
Supply
Hose
Supply
Stop
15 1033981-2-A