7. TIPS - MAINTENANCE
To keep the appliance performing well, remove dust regularly from the inside of the appliance
by vacuuming the air inlets and outlets.
Preferably use universal cleaning products based on surface-active agents (soap, etc.) and a
microfibre-type cloth. For simple dust removal, a cloth is sufficient.
To ensure optimum fan operation, a maintenance message
MANUEL
displayed on the thermostat LCD after 90 hours of operation.
MANUEL
Maintaining this filter involves removing dust and possibly rinsing with
clean water.
The countdown can be reset by pressing and holding the
the «
» display phase.
When resetting takes effect, the screen displays «
RECOMMENDATIONS AND ADVICE
CAUTION :
There may be an odour when the appliance first heats up. This smell disappears after a
few minutes of operation.
If your installation is equipped with a load-shedding device: as load shedding is a priority,
the appliance may fail to heat up in the event of temporary over-consumption (e.g. if a
washing machine + oven + iron, etc. are used simultaneously). This is normal. As soon
as normal consumption is restored, the appliance will start heating again.
You are strongly advised not to turn off your appliance using the switch when the
appliance's heating indicator is on.
ALL MAINTENANCE OPERATIONS ON OUR APPLIANCES MUST BE CARRIED OUT WITH THE POWER
OFF AND BY QUALIFIED AND APPROVED PERSONNEL.
NEVER USE ABRASIVE OR ACETONE-BASED PRODUCTS THAT COULD DAMAGE THE COATING OF THE
APPLIANCE.
Page 62
MANUEL
MANUEL
MANUEL
MANUEL
will be
dial for 3 seconds during
».
MANUEL
MANUEL