Troubleshooting - Campa CAMPAVER BAINS 3.0 Manual De Instalación Y Utilizacion

6. TROUBLESHOOTING

TYPE
Make sure the digital display is active.
If the digital display is still not turned on.
Make sure you are in comfort mode.
Ensure that the open window function is
not enabled and that there are no open
Appliance
windows or doors in the room.
not heating
The digital display is active, the heating
indicator is off.
Check that the temperature adjustment
has not been changed.
The
appliance is
Check that the appliance is not located
near an open door and/or in a draught.
heating all
the time
The appliance
is not
- Check that it is in programming mode.
responding to
programming
- Check the programming.
commands
Carry out maintenance on the fan filter.
CHECKING
MANUEL
MANUEL
IN ALL OTHER CASES, CONTACT A QUALIFIED PERSON
ACTION
- Press .
- Press repeatedly to reach the
Comfort position.
Ensure that the installation circuit
breakers are closed and press
Press repeatedly to reach the
Comfort position.
Close the door and/or window and
press any button to reset the function.
- Check the set point value.
- The ambient temperature does not
require heating.
- The appliance is in Eco or load
shedding mode : ensure that the load
shedding device has not switched off
the power supply to the appliance.
Adjust the temperature again.
Close the door or exclude draughts.
- Put in programming mode.
- Programme the appliance.
MANUEL
MANUEL
.
MANU
Page 61
M