Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Switch on the ignition key
Within 5 seconds press the
The alarm emits 3 acoustic signals and 3 led fashes to confirm that you enter the function number 1.
ACOUSTIC SIGNALLING
The alarm emits TWO beeps and TWO flashes of the direction indicators.
EXTERNAL PUSH BUTTON
The alarm emits THREE beeps and THREE flashes of the direction indicators.
ENGINE STOP PASSIVE ARMING
The alarm emits FOUR beeps and FOUR flashes of the direction indicators.
ACCIDENTAL ANTI-DISARMING
The alarm emits FIVE beeps and FIVE flashes of the direction indicators.
PREALARM
The alarm emits SIX beeps and SIX flashes of the direction indicators.
ANTI-ROBBERY
The alarm emits SEVEN beeps and SEVEN flashes of the direction indicators.
MANAGEMENT OUTPUT FOR MODULE
/ALARM
The alarm emits EIGHT beeps and EIGHT flashes of the direction indicators.
ANTI-LIFT SENSOR
To end the programming of the system is simply turn off the PANEL IGNITION anytime. All parameters selected in
PROGRAMMING FUNCTIONS PROCEDURE
3 TIMES
and them leave it in
B button
of the remote control.
Press the
B button
of remote control to switch to the next function.
Press the
B button
of remote control to switch to the next function.
Press the
B button
of remote control to switch to the next function.
Press the
B button
of remote control to switch to the next function.
Press the
B button
of remote control to switch to the next function.
Press the
B button
of remote control to switch to the next function.
Press the
B button
of remote control to switch to the next function.
this stage will remain programmed.
ON
.
LED
Push the C button to enable
ON
LED
Push the C button to disable
OFF
LED
Push the C button to enable (Anti-robbery utton)
ON
LED
Push the C button to disable
OFF
(input button for BLUE wire) (FS)
LED
Push the C button to enable
ON
LED
Push the C button to disable
OFF
LED
Push the C button to enable
ON
LED
Push the C button to disable
OFF
LED
Push the C button to enable
ON
LED
Push the C button to disable
OFF
LED
Push the C button to enable
ON
LED
Push the C button to disable
OFF
LED
Push the C button to enable output for alarm
ON
LED
Push the C button to enable the status output for module
OFF
LED
Push the C button to enable
ON
LED
Push the C button to disable
OFF
14
(factory setting FS)
(factory setting FS)
(factory setting FS)
(factory setting FS)
(factory setting FS)
(factory setting FS)
(factory setting FS)
b
Tabla de contenido
