Mounting Diagram - Chauvet SCORPION Scan 3D EU Manual Del Usuario

Setup
Rigging

Mounting Diagram

International laser safety regulations require that lasers must be operated in the
fashion with a minimum of 3 meters (9.8 ft) of vertical separation between the floor
and the lowest laser light vertically. Additionally, 2.5 meters of horizontal separation
is required between laser light and audience or other public spaces:
CAUTION! Use of control, adjustment, or performance of procedures other than what
is specified in this manual may result in hazardous radiation exposure.
•
Before deciding on a location for the product, always make sure there is easy access to the
product for maintenance and programming/ fluid replenishment purposes.
•
Make sure that the structure or surface onto which you are mounting the product can support the
product's weight (see the Technical Specifications).
•
Any surface the product is being mounted to should be able to support 10 times the weight for an
hour without deforming.
•
When mounting the product overhead, always use a safety cable. Mount the product securely to
a rigging point, such as an elevated platform or a truss.
•
When rigging the product onto a truss, you should use a mounting clamp of appropriate weight
capacity.
Mounting Clamp
Safety Cable
Page 8 of 44
Manual Bracket
Adjustment