Memory Slots; Other Features; Function Menu - Alesis HARMONY 61 Guia Del Usuario

Memory

Memory Slots

Harmony 61 has 4 memory slots where you can store the current voice, tempo, beat value,
sustain effect, etc.
Important: The memory slots will be reset to their default settings if you turn Harmony 61 off.
To store the current settings to a memory slot, press and hold Store, press one of the M1–
M4 buttons.
To recall the current settings from a memory slot, press the corresponding M1–M4 button.
Important: You cannot recall a memory slot when 1-Touch Mode is on.
1-Touch Mode
When 1-Touch Mode is on, you can instantly recall any one of four voices in the current style.
To turn 1-Touch Mode on or off, press 1-Touch. OTS will appear in the display. The number
below it (1–4) is the currently selected voice in that style.
Note: By default, Chord Mode is on while 1-Touch Mode is on.
To select a voice in that style, press one of the M1–M4 buttons. The number (1–4) will
appear in the display below OTS.

Other Features

Function Menu

The Function menu contains settings that you can adjust to change the keyboard's performance.
To enter the Function menu, press Function. The last function you chose will appear in the
display. The default function is Transpose.
To exit the Function menu, wait 3 seconds.
To adjust the currently shown function, use the ∧/∨ number buttons.
To select a different function, press Function to select the next one. You can press it
multiple times to cycle through all available functions:
• Transpose: -12 to +12 semitones. Press both ∧/∨ number buttons simultaneously to
reset it to the default value (0).
• Octave: -1 to +1 octave. Press both ∧/∨ number buttons simultaneously to reset it to
the default value (0).
•
Modul (modulation): On/Off. This function is disabled on percussion sounds.
•
Beat: 0, 2–9 beats. The default value is 4.
10