Protectors & Extractors; T260 Pick & Place - jbc RMVE-B Manual De Instrucciones

Protectors & Extractors
For small components (fig. 1 and 2).
We recommend using the protector + tripod
1
Protectors
* Ref. AxB (mm) * Ref. AxB (mm)
P3353 4,3 x 3 48 P2230 15 x 15
P3786 5,2 x 5,2 60 P4010 17 x 17
P3352 5,2 x 7,5 P4005 18 x 29
P3355 5,2 x 9,5 P4030 18,5 x 18,5
P3356 6,2 x 4,2 P1068 18,5 x 24
P3785 7,2 x 7,2 P2685 28,5 x 28,5
P3784 8,2 x 8,2 P4085 31,5 x 31,5
P4035 9 x 13 P2672 33 x 46
P4040 9,5 x 19 P4002 50 x 50
P4080 9,5 x 21 P3357 52,5 x 14
P2220 10 x 10
32
P4045 10,5 x 21
P4090 11 x 16
Tripod
P2235 12 x 17
24
Protector
P1249 12 x 23
44 P4000 12,5 x 12,5
P3354 13,2 x 13,2
P4025 13,5 x 21,5
* Reference Desk
10
For big components (fig. 3 and 4).
We recommend using the extractors
2 3
Extractors
* Ref. AxB (mm) * Ref. AxB (mm)
52 E2052 20 X 20 E2124
64 E2064 20 X 26
80 E2184 24 X 24
E2068 27 X 27
E4020 28,5 X 28,5
E4015 31,5 X 31,5
E2084 33 X 33
E2100 38 X 38
Tripods
* Ref. øC (mm)
T2050 39
T2250 85
Manual extractor
* Ref. øD (mm)
E2190 7
øD
T260 Pick & Place
This tool helps you easily place and remove SMDs of any size using the suction provided by the station.
4
Choose the suction cup that best fits the component (Maximum working temp.: 250ºC / 482ºF):
45 X 45
Insert the needle
with the appropriate
cup for a correct
suction process.
Operation
1. Suction
Tripod
Protector
Once activated
the suction button,
cover the pen hole
with your finger and
pick the component.
Press the button to
start/stop the suction
Pick & Place
Ref. T260-A
You should avoid the
needle to stick out of
the lower part.
2. Release
Lift your finger
to release the
component on the
appropriate place.
w w w.jbctools.com
11