Polygroup SUMMER WAVES ST1100 El Manual Del Propietario página 13

16. When the Clamp 7 is tightened and no more turns can be
made, flip and push the Cam Handle towards the Sand Tank
to secure.
18. The sand filter pump is now fully assembled. To install it to the
pool, connect the Pump Inlet to the pool Outlet with a Long
Hose 13 and one Clamp 15
Then connect the 6-Port Valve Outlet to the pool Inlet with another
Long Hose and Clamps.
Tighten all the Clamps with a flat-blade screwdriver.
6-Port Valve Outlet
15
13
Should you encounter any problems, contact Customer Service at (888) 919-0070 from 8AM to 5PM MST, Monday-Friday.
PUSH
Cam Handle
on each end.
Pool Inlet
15
Pool Outlet
13
15
15
Pump Inlet
Extended operating days and hours during peak season requirements.
17. Connect the Short Hose
2
6-Port Valve Inlet. Tighten the Hose Clamps
screwdriver.
14
15
OWNER'S MANUAL
between the Pump Outlet and the
14
15
6-Port Valve Inlet
15
Pump Outlet
with a flat-blade
13