Before Starting The Engine - VITO AGRO VIR33 Manual De Instrucciones

EN
3. Do not wear loose clothing,
jewelry, short trousers, sandals, or
go barefoot. Do not wear anything
which might be caught by a moving
part of the unit. Secure hair so it is
above shoulder length.
WORKING CIRCUMSTANCE
1. Never start the engine inside a closed
room or building. Exhaust gases contain
dangerous carbon monoxide.
2. Never use the product,
(a) when the ground is slippery or
when you cant maintain a steady
posture.
(b) At night, at times of heavy fog,
or at any other times when your
field of vision might be limited and
it would be difficult to gain a clear
view of the working area.
(c) During rain storms, during
lightning storms, at times of strong
or gale-force winds, or at any other
times when weather conditions might
make it unsafe to use the product.
22
WORKING PLAN
1. You should never use the product
when under the influence of alcohol,
when suffering from ex-haustion or
lack of sleep, when suffering from
drowsiness as a re-sult of having
taken cold medicine or at any other
time when a possibility exists that
your judgment might be impaired
or that you might not be able to
operate the product properly and in
a safe manner.
2. When planning your work
schedule, allow plenty of time to
rest. Limit the amount of time over
which the product is to be used
continuously to somewhere around
30 - 40 minutes per session,
and take 10 - 20 minutes of rest
between work sessions.
WARNING
1. If you clang observe the working
time, or working manner (See SING
THE PRODUCT ), Repetitive
Stress Injury (RSI) could occur.
If you feel discomfort, redness and
swelling of your fingers or any other
part of your body, see a doctor
before getting worse.
2. To avoid noise complaints, in
general, operate product between 8
a.m. and 5 p.m. on weekdays and 9
a.m. to 5 p.m. on weekends.
NOTE: Check and follow the local
regulations as to sound level and
hours of operations for the product.
BEFORE STARTING
THE ENGINE
1. The area within a perimeter
of 15 m of the person using the
product should be considered a
hazardous area into which no one
should enter. If necessary, yellow
warning rope, warning signs should
be placed around the perimeter
of the area. When work is to be
performed simultaneously by two
or more persons, care should also
be taken to constantly look around
or otherwise check for the presence
and locations of other people
working so as to maintain a distance
between each person sufficient to
ensure safety.
2. Check the condition of working
area to avoid any accident by hitting
hidden obstacles such as stumps,
stones, cans, or broken glass.
IMPORTANT
Remove any obstacle before
beginning work.
3. Inspect the entire unit for loose
fasteners and fuel leakage. Make sure
that the cutting attachment is properly
installed and securely fastened.
4. Be sure the cutting attachment
guard is firmly attached in place.
5. Always use the harness. Adjust
the strap for comfort before starting