Description Of Symbols; Environmental Protection - Silverline 660471 Manual De Instrucciones

GB
Introduction
Thank you for purchasing this Silverline tool. This manual contains information
necessary for safe and effective operation of this product. This product has
unique features and, even if you are familiar with similar products, it is necessary
to read this manual carefully to ensure you fully understand the instructions.
Ensure all users of the tool read and fully understand this manual.

Description of Symbols

The rating plate on your tool may show symbols. These represent important
information about the product or instructions on its use.
Wear hearing protection
Wear eye protection
Wear breathing protection
Wear head protection
Wear hand protection
Read instruction Manual
DO NOT use in rain or damp environments!
Always disconnect from the power supply when adjusting, changing
accessories, cleaning, carrying out maintenance and when not in use!
WARNING: Moving parts can cause crush and cut injuries.
For indoors use only!
Caution!
Class II construction (double insulated for additional protection)
Conforms to relevant legislation and safety standards

Environmental Protection

Waste electrical products should not be disposed of
with household waste. Please recycle where facilities
exist. Check with your local authority or retailer for recycling advice
4
Original Instructions
Technical Abbreviations Key
V
Volts
~ , AC Alternating current
A, mA
Ampere, milli-Amp
Ah Amp hours (battery capacity)
n
No load speed
o
n Rated speed
Nm Newton metres (torque)
°
Degrees
Ø Diameter
Hz
Hertz
W, kW Watt, kilowatt
/min or min
-1 (revolutions or reciprocation) per minute
rpm Revolutions per minute
dB (A) Decibel sound level (A weighted)
Specification
Voltage: ............................................................................. 230V~ 50Hz
Power: ..........................................................................................150W
Rated no load speed : .............................................. 8500 – 25,000rpm
Collet: .............................................................................4.7mm (3/16")
Max. cutting depth: ......................................................................25mm
Power cord length: .......................................................................2.5 m
Protection class: .............................................................................
Weight: ........................................................................................ 1.1kg
As part of our ongoing product development, specifications
of SILVERLINE products may alter without notice.
Sound and vibration information:
Sound pressure L : ................................................................75.0dB(A)
PA
Sound power L : ...................................................................86.0dB(A)
WA
Uncertainty K: ..................................................................................3dB
Weighted vibration a :
h
Drilling: ....................................................................................2.70m/s
Sanding: ..................................................................................1.80m/s
Routing: .................................................................................. 6.60m/s
Uncertainty K: ............................................................................1.5m/s
The sound intensity level for the operator may exceed
85dB(A) and sound protection measures are necessary.
WARNING: Always wear ear protection where the sound level exceeds 85dB(A)
and limit the time of exposure if necessary. If sound levels are uncomfortable, even
with ear protection, stop using the tool immediately and check the ear protection is
correctly fitted and provides the correct level of sound attenuation for the level of
sound produced by your tool.
WARNING: User exposure to tool vibration can result in loss of sense of touch,
numbness, tingling and reduced ability to grip. Long term exposure can lead to a
chronic condition. If necessary, limit the length of time exposed to vibration and
use anti-vibration gloves. Do not operate the tool with hands below a normal
comfortable temperature, as vibration will have a greater effect. Use the figures
provided in the specification relating to vibration to calculate the duration and
frequency of operating the tool.
2
2
2
2