Using Your Power Meter; Before Your Ride; During Your Ride; Zero-Point Adjustment And Thermal Correction - power2max NGeco Manual De Usuario

Using your power meter

Using your power2max NG

BEFORE yOUR RIDE

When your bicycle isn't being used, the power2max NG
the crank is moved, the power2max NG
begins emitting a signal. This is shown by the blinking of the green LED indicator light.
In the first step the green LED signals the battery state and in the second step it signals
the Bluetooth low energy availability. (See LED signals, page 27)

DURInG yOUR RIDE

eco
Your power2max NG power meter updates all parameters in 1 second intervals; they are
transmitted per ANT+ protocols or BLE.

ZERO-POInT ADjUSTMEnT AnD THERMAL CORRECTIOn

To ensure a precise power measurement, the zero-point (the measured value when no
torque is present) is automatically determined by your power2max NG
zero-point adjustment compensates for influences caused by temperature variations and
mechanical zero-point shifts. It is possible to repeatedly set the zero point at the head unit,
but it isn't necessary! This is performed by the system automatically when it is not under
power. "Not being under power" means a stop in pedaling for at least two seconds during
a ride. If a de-powering as described above is not possible, for example during a long
mountain climb, then your power2max NG
temperature. Thus your power2max NG
IMPORTAnT:
For the use on track bikes and fixed gear the auto-zero needs to be switched off. We recommend
performing an auto-zero via bike computer or power2max App regularly.

BATTERy LIFE

Battery life is approximately 400 hours. Battery life can be decreased by low temperatures
and by transporting your bicycle, for example in your car.

AFTER yOUR RIDE

eco
Your power2max NG power meter independently enters standby mode approximately two
minutes after ending your ride. This reduces electricity consumption and increases battery
life.
eco
power meter is as easy as the initial operation and installation.
eco
power meter is activated automatically, and it
eco
power meter automatically compensates for
eco
guarantees a reliable power measurement.
eco
power meter is in standby. Once
eco
power meter. The
23