Installation - power2max NGeco Manual De Usuario

You need an ANT+-compatible head unit that supports the power-only profile (PWR).
For example, suitable head units are:
- CYCLEOPS: Joule 2.0 and 3.0
- GARMIN: Edge 500/510/520/800/810/820/1000, Forerunner 310XT/910XT
- Wahoo Elemnt or Elemnt Bolt
You can find a current list of compatible products at the ANT+ Alliance:
http://www.thisisant.com/directory/power2max-road-rotor-3d-plus-bcd-110-or-130/
In addition, your power2max NG
low-energy compatible display instrument (BLE) that supports the Cycling Power Profile.
The data for power and cadence are calculated and transmitted. By optional payable
upgrade: torque, left-right distribution and pedal smoothness are calculated and trans-
mitted additionally.

InSTALLATIOn

Step 1
First install the chainrings on the power2max NG
take care that they are aligned correctly and solidly attached in accordance with the
respec tive manufacturer's specifications. Guide the large chainring from above onto
eco
the power2max NG power meter.
Step 2
Align the holes for the bolts.
Step 3
After you have guided the small chainring onto the power2max NG
the rear, tighten everything with the dedicated chainring bolts.
IMPORTAnT:
Observe the torque values prescribed by the manufacturer.
Pay attention to the alignment of the chainrings and bolts.
Please adhere to the manufacturer's specifications.
Step 4
Then mount the right crankarm to the power2max NG
crankarm from the front through the opening in the power meter. Pay attention to the
alignment and the correct fitting of the crankset to the power meter. For models with
lockrings like FSA BB386EVO: place a few drops of medium-strength threadlock (e.g.
Loctite 243) on the inner side of the lockring and tighten it with the help of the lockring
tool.
IMPORTAnT:
Please pay attention that the lockring is correctly seated on the threads.
Lock the lockring tool into a vice. This guarantees that the lockring tool is secure and
stable for further installation: tighten the lockring to the prescribed torque values.
You can also find these values in the download area on www . power2max . com or ask
the crankset manufacturer.
For models using bolts to mount the spider to the right crank arm, we recommend using
LOCTIDE 243 or a different middle strong threadlocker. Please use the recommended
tightening torque.
eco
power meter offers the option of using a Bluetooth
eco
power meter. In the process,
eco
eco
power meter from
power meter. Guide the right
21