Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Model
Voltage [V DC ]
Battery
Capacity [Ah]
Weight [kg]
Input voltage [V AC ]
Input frequency [V AC ]
Output voltage [V DC]
Battery
Charger
Charging current [A]
F180
Charging time [min]
Weight [kg]
Safety class
2. List of Contents
Fabric case
Battery
Battery Charger
Instruction manual
Noise and vibration
1. Noise and vibration
1) Noise emission
Measured values are according to EN 60745
Power tool
A-weighted sound power level (L WA ) [dB(A)]
A-weighted emission level (L pA )
Uncertainty (K)
2) The operator to wear hearing protection
3) Vibration emission
Vibration total values(triaxial vector sum)
determined according to EN 60745
Power tool
Drilling
Vibration value ( a h ) [m/s
mode
Uncertainty (K)
4) The following information
The declarde vibration total value has been
measured in accordance with a standard test
FL10813
10.8
1,3
0.2
220-240
50 / 60
10.8
2.6
30
0.4
1EA
1or 2EA
1EA
1EA
DC10.8L2
76
65
[dB(A)]
3
[dB(A)]
DC10.8L2
2.5
2
]
1.5
2
[m/s
]
method given in EN60745 and may be used
for comparing one tool with another.
The declard vibration total value may also be
used in a preliminary assessment of exposure.
5) A warning
The vibration emission during actual use of
the power tool can differ from the declared
total value depending on the ways in which
the tool is used.
Identify additional safety measures to protect the
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such
as the times when the tool is switched off and
when it is running idle in addition to the trigger
time).
Description of Functions and Applications
1. Description of Functions
DC10.8L2
Figure 1
Battery
Figure 2
Charger
Figure 3
2. Applications
Drilling mode : For drilling in woods, metals,
plastics or other non concrete materials.
Operating Instructions
1. How to charge the battery
(1) Insert the plug of the charger in the socket, and
the charging indicating lamp will be flickered in
green,red and yellow in turn within one second.
And then, the battery charger will be in the
standby position.
(2) Insert the battery in the battery charger
considering the polarity, and the charging will be
started immediately.
A new battery will work properly after five
times of charging and discharging. Charge
and discharge the battery, which is not
used for a long time, for two to three times
to function well.
(3) When the battery working time is remarkably
short despite full charging, the life of the battery
may be over. Replace the battery immediately.
23
Tabla de contenido
