Felisatti DC10,8L2 Manual Del Usaurio página 21

Electric shock may cause injury.
Do not use the charger under the rain
or when it is wet.
Failure to observe this can cause serious
injury or death due to electric shock.
Do not insert metal wire or any
conductive object through the
ventilating opening of the charger.
Failure to observe this can cause serious
injury or death due to electric shock.
Do not attempt to disassemble the
charger and keep the charger out of
the reach of children.
If the cord of the charger has been
damaged, replace or repair it
immediately.
Using the charger with damaged cord may
cause electric shock.
Electric shock may cause injury.
Do not throw the battery into the live
fire.
In the fire, the battery may explode due to
high temperature and cause serious injury.
Do not short the terminals of the
battery
If the terminals of the battery is short circuited,
excessive current will flow and fire or
explosion may occur causing serious injury.
Avoid strong impact on the battery
and do not pierce the battery case
with a sharp object.
Fire or explosion may occur causing
serious injury.
Store the battery indoors at 0 ~40
and avoid direct light and closed hot
and humid places.
Fire or explosion may occur causing
serious injury.
Do not make your fingers and hands
touch with the drill bit during
operation.
When your fingers and hands are touched
with the drill bit or caught in it, you may
be injured seriously.
Do not leave the running tool.
Other operators stayed close to you may be
injured.
Set the forward/reverse lever in the
neutral position while you are
changing or operating the tool.
Careless operating of the switch may cause a
serious injury by the rotating part of the tool.
Make sure the battery is attached in
the body of the tool tightly before
you start operation.
When the battery is not attached tightly,
it may be fallen during the operation and
cause an injury in the top of your foot.
Charge only Keyang appoved
rechargeable batteries. Other types
of batteries may burst causing
personal injury and damage
Do not disassemble battery.
Incorrect reassembly may result in a risk of
electric shock, electrocution or fire.
Accessories may be hot after
prolonged use.
When removing the bit from the tool avoid
contact with skin and use proper
protective gloves when grasping the bit or
accessory.
Keep the battery from being
overheated.
If overheated battery is inserted, high
temperature standby is indicated and
charging can only start after the battery has
been cooled down.
When the battery is overheating due to
continuous operation, in order to protect the
battery performance will automatically shut off
the power.
Leaving the battery for a prolonged
time without using it will shorten the
life of the battery.
If the battery is to be stored for a prolonged
time, charge it completely before storing it.
To use the battery for a long period of time,
charge it completely every 3 months.
If drill stalls, it is usually because it is
being overloaded or improperly used.
Release trigger immediately.
Do not click trigger on and off in an attempt to
start a stalled drill. This can damage the drill
An explanation of any symbols or
pictograms on the tool relevant to safe use
Wear goggles
Wear ear plugs
.
Wear safety helmet
Wear protective gloves
21