Front Panel - Magnat MCD 750 Notas Importantes Sobre La Instalación / Certificado De Garantía

FRONT PANEL

1 ON/STBY
Switches the device on when it is in the standby
mode. If the LED does not illuminate, actuate the
power switch located on the rear of the device.
Conversely the device can be switched from
power operation to the standby mode.
2 LED STATUS INDICATION
This illuminated display indicates the MCD 750's
2 possible states:
• LED is illuminated green: The MCD 750 is
switched on. The device is ready for use.
• LED is illuminated red: The MCD 750 is in the
standby mode.
3 EJECT
Opens or closes the CD compartment.
4 CD COMPARTMENT
Insert the CD into the compartment with the
label facing upwards.
5 PLAY/PAUSE
Starts or pauses the playback from a CD.
6 STOP
Stops a CD that is playing.
7 SEARCH/SKIP
Brief press: Playback starts at the beginning of
the current track.
Two brief presses: Playback starts at the
beginning of the previous track.
Press and hold: High-speed rewind. Remains
active as long as the button is depressed.
8 SEARCH/SKIP
Brief press: Playback starts at the beginning of
the next track
Press and hold: Fast forward. Remains active as
long as the button is depressed.
9 DISPLAY
The following information is indicated in the
display:
• After switching on (no CD inserted):
NO disC
• After a CD has been inserted and read: Tot al
number of tracks on the CD, total playing time
of the CD in minutes and seconds
Cd 15 46: 3 2
• If there are MP3 or WMA files on the CD, the
file type and number of files on the CD are
displayed:
MP3 15 FiLEs
• When playing a CD:
Currently played track, elapsed time of the
track:
02 03: 4 5
• The operating status is also indicated by the
following symbols:
► Playback
II Pause
11
• CD text, ID3 tags
If the CD supports CD text or the MP3 or WMA
files contain ID3 tag information, these are
displayed in the 2nd line of the display. See
also the REMOTE CONTROL section in this
regard.
10 DIM
This button can be used to adjust the brightness
of the display (3 levels).
11 SENSOR FOR THE REMOTE CONTROL
Please aim at this sensor when using the remote
control.