Extension Cord - Fein KBM80U Manual Del Usaurio

3 41 01 126 21 0.book Seite 7 Donnerstag, 21. Januar 2010 1:48 13

Extension cord

If the use of an extension cable
CAUTION
is required, its length and con-
ductor cross-section must be adequate for the
applicational case, in order to prevent a volt-
age drop in the extension cable, power loss and
overheating of the power tool. Otherwise, the
extension cable and power tool are liable to
electrical danger, and the working efficiency is
impaired.
Intended use of the power tool.
Core drill for drilling with core and solid drill bits, reaming, countersinking and tapping on
materials with surfaces suitable for magnets in
Operation of the power tool off power generators.
Operate the power tool only off
a.c. generators with sufficient power
output that do not have any distortion of the
voltage curve.
Operating the power tool off
WARNING
power generators whose no-
load speed exceeds the voltage value on the
type plate of the power tool is prohibited.
Recommended dimensions of extension cords
at an operating voltage of 120 V – single-phase
a. c., with only one power tool
KBM80U/KBM80auto connected :
Cord Size in A.W.G.
14 12
Cord Length in Feet
25 50
weather-protected environments using the application tools and accessories recommen-
ded by FEIN.
en
7