Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Caution
Electrical Shock Hazard. Can cause
electrical shock or equipment damage.
Disconnect power supply before connecting wiring.
Wiring must comply with applicable
codes, ordinances and regulations:
1. Wire the C7089U Outdoor Sensor to
the S terminals on the humidity control.
If leadwire provided with C7089U is not
long enough (60 in.), run a cable to a
hole at C7089U location.
• Using color-coded, 18-gauge,
shielded thermostat wire is
recommended. For example of
general wiring of C7089U, see
image at right.
• Pigtail wiring can be used.
2. Mount C7089U in its mounting clip.
3. Plug wiring hole using nonhardening
caulk or putty.
1
C7089U
1
USE APPROPRIATE MOUNTING MEANS FOR THE
TYPE OF STRUCTURE.
2
PLUG WIRING HOLE WITH NON-HARDENING
CAULK OR PUTTY.
19
WIRING HOLE
THROUGH
STRUCTURE
C
R
U
U
S
S
2
M34611B
Tabla de contenido
