Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Ingeteam
7.
Fit the combiner box onto the plates. Once it is fitted, secure it by fastening the lower part with the two
screws removed in point 3.
8.
Install the two ducts in the combiner box. To maintain the protection rating, the insulating seals supplied
must be installed. If the combiner box is installed separate from the inverter, couplings must be installed
instead of the ducts provided.
9.
Remove the DC connection caps from the inverter.
10. Hang the inverter from its plate, inserting the combiner box ducts into the bottom holes of the inverter.
Secure the ducts inside the inverter using the supplied nuts. The insulating seal must be installed
18
Installing the unit
ABI2015IQM03_ - Installation manual
Capítulos
Tabla de contenido
