Idiomas disponibles
Idiomas disponibles
2
SYSTEM DESCRIPTION.
2.1
Composition.
The Cebora ROBOT Welding System is a
equipments system suitable for welding, developed
for use in combination with a Welding Robot arm
on automated welding systems.
1
Power Source – Control Panel cable.
2
Power Source – Wire Feeder extension.
3
Power Source – Robot Control cabinet cable.
4
Power Source – Robot Interface CAN bus
cable.
5
Robot Control cabinet.
6
Welding wire spool holder.
7
Torch.
8
Wire Feeder unit.
10 Welding wire sheath.
21 Power Source.
22 Cooling Unit.
24 Power Source Control Panel.
25 Robot Interface.
26 DeviceNet cable (supplied with Robot
Interface).
2.2
This Instruction Manual.
This Instruction Manual refers to the Robot Digital
Interface RDI210 and was prepared in order to
instruct the staff assigned to the installation, the
operation and the maintenance of the welder.
3.300.987-H
It is made up of a Power Source, which may be
equipped with a Cooling Unit, a Wire Feeder, a
Control Panel and a Robot Interface (fig. 2.1).
fig. 2.1
It must be conserved with care, in a famous place
to the several one interested, it will have to be
consulted every time are doubts, employee for the
replacement parts request and will have to follow
all the operating life of the machine.
WARNING !
incorrectly and work that is not
carried out correctly can cause serious
injury and damage.
Do not use the functions described
here
until
completely understood all of the
following documents:
- this "Instructions Manual";
- Instruction Manual of equipments
composing Welding System (e.g.:
Power
Control Panel, included witch of
eventual option).
Operating
the
equipment
you
have
read
Source,
Wire
Feeder,
GB
and
15
