Silvercrest SEKU 2000 A1 Instrucciones De Uso página 72

Assembly
Then, bring the front panel
♦
enter the holes on the right edge of the side panel.
When done, screw all 5 adapter sleeves
♦
clamped into the adapter sleeves and the panels are seated fi rmly together and at right angles.
Step 3
Take the centre front panel
♦
Then place 6 adapter sleeves
♦
that the arrows on the adapter sleeves each point to the outer edge of the centre front panel
Insert 6 double locking pins
♦
with the screwdriver to the right until the locking pins are fi rmly secured.
Place 2 wood plugs
♦
Step 4
Now connect the so prepared centre front panel
♦
For this, insert 3 adapter sleeves
♦
with the screwdriver so that the arrows on the adapter sleeves each point to the outer edge of the side
panels.
Then, guide each of the double locking pins
♦
in the edges of the side panels.
When done, turn all 6 adapter sleeves
♦
until all parts are at right angles to each other and fi rmly tightened.
SEKU 2000 A1
and side panel
4
to the right with the screwdriver until the locking pins are
E
and lay it face down.
5
in the 6 large holes. Turn the adapter sleeves with the screwdriver so
E
in the holes on the front sides of the panel and turn the adapter sleeves
C
into the holes of the front panel
B
C
B
in the large holes in the side panels. Turn the adapter sleeves
E
C
in the centre front panel
E
C
E
B
8 together at right angles, so that the locking pins
.
5
E
B
5
with the side panels prepared in steps 1 and 2.
5
of the centre front panel
5
with the screwdriver to the right,
5
C
B
5
D
.
5
E
C
E
into the corresponding holes
E
GB
MT
71