Memory Functions; Recalling Measurements In Memory - smartheart 01-540 Serie Manual De Instrucciones

MEMORY FUNCTIONS

Recalling Measurements in Memory

You can recall up to 60 total measurements in memory. These measurements can
be shared with your physician or trained healthcare professional.
1. Press and release the MEM button. The unit will show how
many measurements are stored within the bank, Fig 1.
2. Press the MEM button again to scroll through the saved
measurements. Measurements will appear on the display
from oldest to most current.
All results for a given measurement will display, including
measurement results, pulse rate, Hypertension Indicator,
Irregular Heartbeat alert (if applicable), and date/time
stamp, Fig 2. The measurement results and pulse results will
alternate, flashing between measurement and pulse every
2-3 seconds.
3. When the number of readings exceeds 60, the oldest data
will be replaced with the new record.
4. Press START to turn the monitor OFF at any time during
review of the stored measurements.
Clearing Measurements from Memory
1. Press and release the MEM button. The unit will display
how many measurements are stored within the bank.
2. Press and hold down the MEM button until four horizontal
lines flash, Fig. 3. This indicates that all measurements
have been erased.
16 • ENGLISH
MEM
Fig. 1
MEM
Fig. 2
MEM
Fig. 3