S&P CK-50 Manual Del Usuario página 14

• Don't remove the front grille while the fan is
on or in motion. The fan must always be used
with the front grille properly assembled.
THE MANUFACTURER WILL NOT BE HELD
LIABLE FOR DAMAGES TO PEOPLE AND/OR
PROPERTY DUE TO NON-COMPLIANCE WITH
THESE WARNINGS.
3.- INSTALLATION
• For best performance, the exhaust fan must be installed
inside a kitchen hood. The base of the kitchen hood should
slightly overhang the cooking surface (Figure 1).
• The device must be centered over the cooking surface at a
distance of 650 mm for electric ranges and 750 mm above gas
or mixed ranges. (This distance may vary depending on current
standards in each country).
• The exhaust fan must be installed vertically to allow for
cleaning grease from the tray.
• To install directly on the wall, drill three holes and attach the
device with the wall plugs and screws provided.
• We recommend using an air-outlet duct with the same
diameter as the opening on the exhaust fan (Ø 120).
14