Front View; Side View - PEERLESS Mounts PRG-UNV Instalación Y Ensamblaje

To prevent tampering with the pitch and roll adjustments: Tighten the two tamper resistant
11
security screws on the projector mount assembly using 4 mm security allen wrench (I) to lock the
pitch and roll adjustments as shown below.
NOTE: Tighten screws firmly, but do not overtighten. Overtightening can damage the mount.
• Do not adjust pitch or roll while tamper resistant security screws are fully engaged.
• Loosen the two tamper resistant security screws one complete turn before adjusting the projector
mount assembly or damage may occur.
WARNING

FRONT VIEW

SIDE VIEW

14 of 51
TO LOCk ROLL TIGHTEN
TAMPER RESISTANT SECURITy
SCREW
TO LOCk PITCH
TIGHTEN
TAMPER RESISTANT
SECURITy SCREW
ISSUED: 09-30-09 SHEET #: 056-9024-1