Shelves And Bins - Cafe CDB36 Manual Del Proprietário

Using the Refrigerator

SHELVES AND BINS

PAN REMOVAL
To remove a pan, pull it out and lift the front up and out of
the wire holder. Lift the back up and out.
To replace a pan, place the back of the pan in the wire
holder, making sure the indentations at the back of the
pan fit into the back of the wire holder. Then lower the
front of the pan into the wire holder. Press firmly on the
top of the pan until it snaps into place.
ADJUSTABLE SHELVES
Tempered glass shelves in the fresh food compartment
enable you to make efficient shelf arrangements to fit
your family's food storage needs.
To remove shelves: Tilt shelf up at front, then lift it up
and out of tracks on rear wall of refrigerator.
To replace shelves: Select desired shelf height. With
shelf front raised slightly, engage top lugs in tracks at
rear of cabinet. Then lower front of shelf until it locks into
position.
CAUTION
Handle glass shelves carefully. Glass
shelves and covers may break if exposed to impact, such
as bumping or dropping. Tempered glass is designed to
shatter into many small pieces if it breaks.
DOOR BINS
PAN REMOVAL
Some door bins are adjustable and can be moved up and down to meet your storage needs.
NOTE: The deeper door bins must be placed at the
bottom of the door only.
To remove any bin:
Lift the bin up and slide it toward you.
FREEZER DRAWER WITH BASKET
basket.
This basket can be pushed back so items on the bottom
To remove the basket:
2 \ Lift up the back of the basket, then slide the basket
back until it clears the front hooks.
opening to maintain normal operating performance.
49-1000519 Rev. 0
To remove basket
9