Tabla de contenido
Idiomas disponibles
Idiomas disponibles
STEP 2B Attach Wall Plate
CAUTION:
Avoid potential personal injury or property damage!
●
Mount wall plate assembly
●
Minimum solid concrete thickness: 8 in. (203 mm)
●
Minimum concrete block size: 8 x 8 x 16 in. (203 x 203 x 406 mm)
1.
Position the wall plate template
2.
Drill two pilot holes using a 3/8 in. (10 mm) diameter masonry drill bit.
IMPORTANT: Pilot holes must be drilled to a depth of 3 in. (75 mm). Never drill into the mortar between blocks.
3.
Remove the wall plate template
(Fischer UX10 x 60R- included in the Concrete Installation Kit CMK1).
CAUTION:
Be sure the anchors
1
12
12
directly onto concrete surface (no wall covering)
13
on the wall at your desired height. Level the wall plate template and mark the hole locations.
12
and insert two anchors
12
are seated flush with the concrete surface.
C2
2
Solid Concrete / Concrete Block Installation
C2
3
12
Concrete Installation Kit CMK1 is not included
Contact Customer Service to inquire about
the additional hardware.
NOTE: TV shifts 21.9 mm (7/8 in.) to the right
or left when in the home position. Consider this when
selecting the location of your wall mount.
C2
3 in. (75 mm)
3/8 in.
(10 mm)
Tabla de contenido
