Operation; (4.1) Fast Startup Operation - Snooper SPT200 Guía De Usuario

4. Make sure that the Sim card is not locked using a PIN code

4. Operation

(4.1) Fast Startup Operation

Place your Snooper Tracker in an open area and push the power switch to the on
position.
The tracker should start to work within 10 to 20 seconds. The GSM LED indicator
will flash once a second when the tracker is successfully receiving GSM signals. If
there is no GSM network, the GSM indicator light will remain off.
• While the STP200 is searching for satellite signals, the GPS indicator light will
flash every 2 seconds. Once GPS connectivity has been establish the GPS
indicator light will illuminate permanently.
• Once both GSM and GPS signals have been established your SPT 200 is ready for
use.
6
Snooper Tracker User Guide (9 lang).indd 6 12/11/08 17:44:11