Frequently Asked Questions; Optional Accessories - Snooper SPT200 Guía De Usuario

6. Frequently Asked Questions

(6.1) Q: When I ring the SPT 200 it does not automatically terminate the call
and does not return the position via SMS.
A: Please check that the network ID of the mobile phone being used has not been
hidden. Please ensure that any pin or security code has been disabled. Please note
you may have to put the Sim card in to a mobile phone to change the settings.
(6.2) Q: When I ring the SPT 200 it transfers my call to an answer service and
does not return the position via SMS.
A: Please check that the answer service on the Sim card has been switched off (you
may need to contact the network provider to disable this feature)
(6.3) Q: Can I reset my SPT 200 and return it to the 'Factory' setting?
A: Yes, you can reset your SPT 200 by following these instructions:-
1. Ensure that the SPT is in a position where it can receive a good GPS connection.
For example outside in an open area. Not inside a building.
2. Press and hold the red "SOS" button whilst switching on the unit.
3. Continue to hold the red "SOS" button until the GSM and GPS LED illuminate.
4. Finally release the "SOS" button. The unit should now have been returned to the
factory settings.

7. Optional Accessories

Hardwire lead & extension GPS antenna Kit - £49.99 inc vat
Snooper Tracker User Guide (9 lang).indd 13
13
12/11/08 17:44:12