Installation - Pleasant Hearth SPK100 Manual Del Usario

INSTALLATION

6. a. Attach Threaded Nipple to Valve.
b. Install proper Orifice for the size Log
Set into Threaded Nipple.
c. Install Flare Fitting to inlet of Valve.
Note: Save the orifices removed from the appliance
for future use.
7. Attach Orifice to Nozzle by rotating the
complete Valve Bracket Assembly.
Tighten securely until Valve Bracket
Assembly is level with burner pan.
8. Attach Pilot Bracket and Pilot Assembly
to Burner Pan.
9. Notice: Use caution not to damage or break the
aluminum pilot wire when routing and connecting.
a. Connect Pilot Gas Line to Valve.
Finger tight quarter turn.
b. Connect Thermocouple Wire to Valve.
Finger tight, quarter turn.
c. Connect Piezo Wire to Piezo
A
DETAIL A
Burner Pan
Install Knob
Burner Pan
Assembly
Piezo Wire
Thermocouple Wire
9
Select the correct orifice
for your burner size;
18 for an 18" Burner Size (#50)
24 for a 24" Burner Size (#46)
30 for a 30" Burner Size (#43)
Valve
Bracket
Assembly
Orifice
Nozzel
Screw the Orifice into
the Nozzel by rotating
the entire valve bracket
assembly clockwise.
Tighten securely until
valve bracket assembly
is level with burner pan.
Complete the assembly by
screwing the Pilot Gas Line
and Thermocouple Wire into
the Valve by turning clockwise.
Push the Piezo Wire into the
Piezo connection as illustrated.
Pilot Gas Line