Tabla de contenido
Idiomas disponibles
Idiomas disponibles
15.
CHARGER MAINTENANCE INSTRUCTIONS
15.1
Unplug the charger from the booster before attempting any maintenance or cleaning.
15.2
Use a dry cloth occasionally to wipe dirt or oil from the charger. Do not use cleaning fluids.
15.3
All other servicing should be performed by qualified service personnel.
15.4
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent
or similarly qualified persons, in order to avoid a hazard.
16.
CHARGER MOVING AND STORAGE INSTRUCTIONS
16.1
Store the charger in an upright position, inside, in a cool, dry place.
17.
TROUBLESHOOTING – FOR CHARGER
PROBLEM
CHECK BATTERY (red) LED
on charger is on.
CHECK BATTERY (red) LED
is flashing.
Booster shows 100% charge,
but charger still shows
charging (yellow LED).
18.
CHARGER SPECIFICATIONS
SCI200B Charger
Input
Output
Approximate Charging Time
Weight
POSSIBLE CAUSE
Charger is not making a good
connection to the booster.
Battery is defective (will not
accept a charge).
Indicates the charger is in
abort mode.
Unit needs more charge.
120–240V~, 50/60Hz, 0.47–0.28A
12V
24 hours
0.54 kg
59
•
•
REASON/SOLUTION
Check the connection. Make
sure the connection points are
clean.
Have the battery checked.
See Section 14.8.
Charge Booster until
the charger's green LED
comes on.
2A
Tabla de contenido
