Getting Started; Function Keys - Technoline WT195 Manual De Instrucciones

WT195 – RADIO CONTROLLED CLOCK WITH TEMPERATURE
USER' INSTRUCTIONS
Please read the instructions carefully and keep the manual well for future reference.

GETTING STARTED

1. Remove the battery door.
2. Install two new AA size batteries as per the polarity information marked on the
battery compartment.
3. Replace the battery door.
4. Once the battery is installed, the normal segments of the LCD will be shown before
entering the radio controlled time reception mode.
5. The RC clock will automatically start scanning for the radio controlled time signal in
8 seconds.
Note
If no display appears on the LCD after inserting the battery, press the "RESET" key
by using a metal wire. In some cases, you may not receive the signal immediately.
Due to the atmospheric disturbance, the best reception often occurs during nighttime.

FUNCTION KEYS

CLOCK key:
- In normal time mode,press and hold it for 2 seconds to enter normal time setting.
- In setting mode, press it to step the setting items. Or press and hold it for 2 seconds
to return to normal time mode and save the values.
ALARM key:
- In normal time mode,press it to display alarm time for 5 seconds.Or press and hold
it for 2 seconds to enter alarm time setting.
- In setting mode, press it to step the setting items.
- After setting, press it again to save the setting values.
ALARM ON / OFF switch:
- Slide the switch to turn on/off the alarm.
DOWN key:
- In setting mode, press it to decrease the setting value. Press and hold it to speed up
the setting.
UP key:
- In setting mode, press it to increase the setting value. Press and hold it to speed up
the setting.
SNOOZE/LIGHT
- Press it once to turn on the backlight for 5 seconds.
- When the unit is sounding,press it to stop the current alarm and enter the snooze
mode.
NIGHT LIGHT FUNCTION ON/OFF switch:
- Slide it to ON position to turn on the night light function, that the backlight will turn
on automatically when the light-sensor can not sense light in dark environment.
- Slide it to OFF position to turn off the night light function.
RCC key:
- Press it to switch between Celsius and Fahrenheit.
GB 1