Guardian Technologies AC4900 Instrucciones De Uso Y Cuidado página 5

CLEANING & MAINTENANCE
e. Reattach the Rear Cover of the unit and
securely latch into place.
FILTER REpLACEMENT
To maintain the performance of the air cleaner, it is recommended that the filter be replaced about
every 6 months. The replacement requirements will vary depending on usage and environmental
conditions.
CHANGE FILTER INDICATOR
The green power light on the air cleaner will turn red and flash continuously indicating that it is time
to replace the filter. Replace the filter according to the directions then press the UV/HEPA Reset
Button and hold for 3 seconds to restart the system. The light will turn back to green. Depending on
usage, filter will last approximately 6 months.
Clean Air Delivery Rate
From air cleaner to air cleaner, compare the CADR numbers. First look at suggested room size. Then refer
to the Clean Air Delivery Rate (CADR) numbers. The higher the number, the faster the unit filters the air.
This air cleaner is suggested for use in a single, closed room up to 183 square feet.
Higher CADR rates provide improved performance in all room sizes. Portable air cleaners will be much
more effective in rooms when all the doors and windows are closed.
TObACCO SMOkE: 118+
This value represents performance that can be expected within the first 72 hours of operation. Subsequent
use may vary with use.
Tested per ANSI/AHAM AC-1 National Standard
What is CADR?
CADR stands for "Clean Air Delivery Rate," which indicates the volume of filtered air delivered by
an air purifier. CADR ratings show the effectiveness of how efficient the air purifier is at capturing
fine particules from things like tobacco smoke and plant pollens from the room.
NOTE
: Do NOT stick any foreign objects or your fingers inside of the unit.
CAUTION
: Do NOT use gasoline, benzine, thinner, harsh cleaners, etc. on and/or in
the unit while cleaning as they will damage the product.
NEVER use alcohol or other solvents.
E-8
INSTALLING & REMOVING UV-C bULb
CHANGE bULb INDICATOR
The UV-C light on the front of the air cleaner will turn red when it is time to replace the bulb.
Replace the bulb according to the directions then press the UV/HEPA Reset Button and hold for
3 seconds to restart the system. The light should remain a constant blue.
REpLACE bULb
1. Remove the Rear Cover 2. After removing the Rear
of the unit by pushing Cover from the unit, remove
Lock & Release Button. the Combination Filter.
3. After removing the Combination 4. The UV-C Bulb is removed
Filter, use a Philips head by carefully grasping the
screwdriver to remove two (2) bulb with a clean cloth or
screws and detach the UV-C tissue and pulling the bulb
Metal Shield. straight out of the unit.
5. The UV-C Bulb is reinstalled by sliding it, horizontally, back into the slots at the top of the unit.
6. Push and hold UV/HEPA Reset Button for 3 seconds to reset UV Bulb Change Indicator.
REpLACEMENT bULb: Lb4000
AVAILAbLE AT 866.603.5900 OR WWW.GUARDIANTECHNOLOGIES.COM
pULL UV-C bULb
STRAIGHT OUT OF UNIT
bulb is NOT visible until
the UV-C METAL SHIELD
has been removed.
E-9