Harmony BIG BOOST DELUXE Manual De Instrucciones página 22

1. Place the booster seat firmly against the back of a
forward-facing vehicle seat in a position equipped
with a vehicle lap-and-shoulder belt and headrest.
Booster must be level, stable and not rock side-to-
side (see "Vehicle seating positions", pg. 13).
2. Have your child sit on the booster seat with their back
flat against the vehicle seat.
3. Thread both sides of the lap belt
and the lower end of the shoulder
belt UNDER BOTH armrests as
indicated and ensure that the lap
belt is snug across child's hips just
touching their thighs and is NOT
across their stomach ❶.
4. Buckle the vehicle seat belt into place
and ensure it is secure by gently pulling on it.
! BOTH SIDES OF THE LAP BELT AND THE LOWER END
OF THE SHOULDER BELT MUST PASS UNDER BOTH
ARMRESTS.
! THE VEHICLE'S SHOULDER BELT MUST LIE ACROSS
THE CHILD'S SHOULDER AND LAY ACROSS THE CHEST
– NOT THE FACE OR NECK. If the belt does not lie
properly across the child's shoulder and chest, the
RED shoulder belt guide MUST be used to ensure
proper placement (see "Using shoulder belt guide",
pg. 22).
ENTANGLEMENT WITH VEHICLE BELT
! WARNING: To avoid possible entanglement and
choking with your vehicle's shoulder belts, Harmony
Juvenile Products recommends that the following
precautions are taken when installing your booster
seat:
1. Pull the shoulder portion of the vehicle seat belt all
the way out until the retractor locks.
21
❶