Rotating The Double-Sided Drive - Sachtler Ace Follow Focus Manual De Instrucciones

EN EN

Rotating the double-sided drive

The double-sided drive can be rotated to allow the gear mechanism to move in either direction.
To rotate the double-sided drive (see Fig. 4):
If fitted, loosen and remove the friction wheel/drive gear that is attached to the shortest
side of the double-sided drive [A, B].
Using the 3mm Allen key supplied, loosen the screw securing the collar [B].
Rotate the double-sided drive 180 degrees, until an audible 'click' is heard [C].
Using the 3mm Allen key supplied, tighten the screw to secure the double-sided drive in
place [D].
If required, install and secure the friction wheel/drive gear to the shortest side of the
double-sided drive [D, E].
Fig. 4 Rotating the double-sided drive
-6-