Maintenance; Cleaning - Sachtler Ace Follow Focus Manual De Instrucciones

EN EN

Maintenance

Cleaning

During indoor use, the only cleaning required should be a regular wipe over with a lint-free cloth.
Dirt accumulated during storage may be removed using a semi-stiff brush or vacuum cleaner.
Particular attention should be paid to the lower support rod bridge, the double-sided gear drive
spindle and the end stop bezels.
The marking disc must be removed from the Ace Follow Focus before cleaning. Follow the
instructions supplied with the marking pen when cleaning the marking discs.
CAUTION! Do NOT use solvent or oil-based cleaners, abrasives or wire brushes to
remove accumulations of dirt, as these damage the protective surfaces.
Use only detergent-based cleaners.
Use out-of-doors under adverse conditions will require special attention. Salt spray should be
washed off with fresh clean water at the earliest opportunity. Sand and dirt acts as an abrasive
and should be removed using a semi-stiff brush or vacuum cleaner.
-10-