For use at night
Switching on
Remove the lens cap. Actuate the main switch
(ON). The green LED lights up. When you look
through the eyepiece you will see a green,
fluorescing image.
Adjustment
Aim at an object situated at a distance of 22 - 33
yards (20 - 30 meters). Turn the focusing ring on
the eyepiece to get a sharp image. Then turn the
front focusing ring to make the image sharper
still. Repeat this procedure if necessary.
20
Infrared illuminator
The infra-red illuminator provides you with an
improved imaging result under inadequate
light conditions. After actuating the infra-red
illuminator switch the image appears brighter.
Switching off
Actuate the main switch. When you look
through the eyepiece the green image remains
visible for a few more minutes, before it
disappears. This is normal and not a fault,
because the Night-Vision scope always
switches off gradually.