Technical Data - V2 Wisant 19-230V Manual Del Usuario

EC DECLARATION OF INCORPORATION
FOR PARTLY COMPLETED MACHINERY
(Directive 2006/42/EC, Annex II-B)
The manufacturer (*) V2 S.p.A., headquarters in
Corso Principi di Piemonte 65, 12035, Racconigi (CN), Italy
Under its sole responsibility hereby declares that:
the partly completed machinery model(s):
WISANT 19-230V (*)
WISANT-35-400V (*)
Description: electromechanical actuator for sectional doors
- is intended to be installed on sectional doors to create a
machine according to the provisions of the Directive 2006/42/EC.
The machinery must not be put into service until the final
machinery into which it has to be incorporated has been declared
in conformity with the provisions of the Directive 2006/42/EC
(annex II-A).
- is compliant with the applicable essential safety requirements
of the following Directives:
Machinery Directive 2006/42/EC (annex I, chapter 1)
Low Voltage Directive 2006/95/EC.
Electromagnetic Compatibility Directive 2004/108/EC.
The relevant technical documentation is available at the national
authorities' request after justifiable request to:
V2 S.p.A., Corso Principi di Piemonte 65,
12035, Racconigi (CN), Italy
The person empowered to draw up the declaration and to provide
the technical documentation:
Cosimo De Falco
Legal representative of V2 S.p.A.
Racconigi, 16th January 2012
(*) made in extra EU Countries

TECHNICAL DATA

MODEL
Door area
Power supply
Rated absorbed power
Torque
Shaft diameter
Average speed
Working cycle
Thermal protection
Working temperature
Protection degree
Motor weight
Limit switch range
9
WISANT WISANT
19-230V 35-400V
19 m 2 35 m 2
230Vac - 50Hz 400Vac - 50Hz
550 W 550 W
60 Nm 120 Nm
25,4 mm 25,4 mm
22 rpm 22 rpm
30% 30%
120°C 120°C
-20 ÷ +40 °C -20 ÷ +40 °C
IP44 IP44
22 22
19 19