Operation; Using The Control Panel - HAMPTON BAY EST-417-10 Guía De Uso Y Mantenimiento

Operation

Read All Instructions Before Use
Check that the heater outlet grill is not covered or obstructed in anyway, and make sure the power to the unit is switched on.
NOTE: When the heat function is used for the first time, a slight odor may be present. This is normal and should not occur again unless the
heater is not used for an extended period of time.
1

Using the Control Panel

□ The control panel is located behind the door of the stove.
□ Main Power Switch: The Power
supplies power to all of the functions of the
stove. This switch must be in the ON position for
any functions to work.
□ Flame Effect: Toggle the Power Switch ON. The
Power indicator light will glow. The flame effect
will be visible through the front glass.
□ Temperature Knob: Toggle the Temperature
Switch ON, the Temperature control knob
regulates the temperature level of the room.
The further the knob is rotated clockwise, the
higher the temperature setting. Turning the knob
counterclockwise will lower the temperature
setting. Use this function to help regulate the
ambient temperature level.
□ Temperature Limiting Control: This heater is
equipped with a Temperature Limiting Control.
Should the heater reach an unsafe temperature,
the heater will automatically turn off. To reset:
Unplug the power cord from the outlet. Wait
5 minutes. With the Power switch in the OFF
position, plug the power cord back into the
outlet.
Switch
9
Please contact 855-HD-HAMPTON for further assistance.
HAMPTONBAY.COM