Silvercrest SRK 400 A2 Instrucciones De Uso página 29

NOTE
►
4) Place the cooking bowl
5) Now close the lid.
6) Connect the power cable
7) Switch the appliance on using the On/Off switch
8) Press down the function selector switch
9) When the rice is ready:
10) When you have removed the rice, switch the device off at the On/Off switch
NOTE
►
CAUTION - PROPERTY DAMAGE!
►
NOTE
►
■ 26 │ GB │ IE
Always prepare at least enough rice so that the when the water is added it
reaches at least the CUP marking "2". Failure to do so could lead to poor
cooking results!
Ensure that...
–
... there is no moisture or rice on the outside of the cooking bowl
this will prevent soiling of the cooking area. If necessary, wipe the outside
with a clean cloth.
–
... the cooking bowl
rice cooker housing. Always insert the cooking bowl
precisely into the rice cooker housing. Otherwise, the safety shut-off of
the appliance may trigger and the appliance will not allow itself to be
switched on.
the power socket.
lamp " " lights up.
of time specified on the rice packet.
–
If you want to eat the rice immediately, disconnect the plug from the
mains power socket.
–
If you wish to keep the rice warm (max. 2 hours), press the function
selector switch
and pull the power plug out of the mains power socket.
Some types of easy-cook rice still have to swell after cooking.
Always follow the preparation instructions on the packaging of the rice.
Use only the supplied plastic spoon
may cause damage to the anti-stick coating of the cooking bowl
You can insert the plastic spoon
rice cooker. This is always ready to hand!
in the appliance:
is not skewed or tilted when being placed in the
to the socket
and cook the rice for the amount
upwards.
to remove the rice. Other spoons
into the bracket
correctly and
and insert the mains plug into
. The orange control
at the edge of the
–
.
SRK 400 A2