Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Pump-Runner
3.
Change of workplace
1)
Fill the Pump-Runner reservoir with about 1.5 litres of water
up to the marking on the inside and close it.
For horizontal transport, the small opening in
the lid with the return hose must be closed.
Cleaning the Pump-Runner
The Pump-Runner is only solvent resistant
to a limited extent.
Do not place seals in solvent, just wipe
them.
Attention
1)
Flush out the reservoir with warm water and commercial
household cleaner.
2)
Flush out the reservoir with warm water and commercial
household cleaner.
3)
Thoroughly clean the catches to guarantee a seal.
4)
Wipe the outside of the Pump-Runner if required.
Accessories/Spare parts
Order
Description
Ref.
314-483
LS-10 Liquid Shield Plus cleaning and conserva-
tion agent 118 ml
2303 134
Sealing ring for intake system ø 1.3"
for 650e, 640i, 740i
2309 431
Sealing ring for intake system 750e, EPX2355
for 750e
2303 132
Sealing ring for intake system ø 2.2"
for 850e, 1150e, 840i,1140i
2309205
Catch set consisting of right hand catch, left
hand catch
2308 600
Seal set consisting of internal seal lid and
return hose seal
2303 131
Lid complete inc. internal seal, return hose seal
and hose clip
2307 090
Reservoir complete inc. catch set
GB
7
Tabla de contenido
