Operating Instructions; Power On/Off; Audible Beep Confirmation; Playing Source Selection - Jensen VM9224 Manual Del Usaurio

OPERATING INSTRUCTIONS

Power On / Off
Press the /SRC button (4) on the unit (or the
control) to turn the unit on. The buttons on the front of the unit light up and the
current mode status appears in the LCD (7).
Press and hold the

Audible Beep Confirmation

An audible beep tone confirms each function selection. The Beep tone can be
disabled through the Setup menu.
Mute/Line Mute
Press the rotary encoder button (7) on the front panel or the MUTE button (3)
on the remote to mute the volume from the unit. Press the rotary encoder
button again to restore the volume. "MUTE" is displayed on the LCD. Adjusting
the volume or using any of the audio setup features cancels the mute function.
If the "MUTE" wire is connected, audio output mutes when a telephone call is
received by the car phone (using optional BTM10) or when verbal navigation is
performed (using optional NAV102).

Playing Source Selection

When the monitor is closed, press the SRC button on the front panel (4) or
remote control (8) to change between available audio playing sources in the
following order: RADIO, DISC, USB1, USB2, SD, BT, NAV, AUX and
CAMERA.
Source Menu
You can also use the touch screen to change the source through the SOURCE
MENU. To access the SOURCE MENU, touch the top left corner of the screen
or press the SRC button on the front panel (4) or remote control (8).
RADIO
RADIO
button to power off the unit.
SOURCE MENU
DISC
N
E
W
S
BT NAV
button (4) on the remote
USB1 USB2
AUX CAMERA
14
VM9224
8GB
SD