Unpack the print module
Lift the print mechanics and control unit out of the box.
Check the print mechanics and control unit for transport damages.
Check delivery for completeness.
Scope of delivery
Print mechanics.
Control unit.
Power cable.
Connection cable (printhead/motors, sensors, power).
I/O accessories (female connectors for I/O).
Retain original packaging for subsequent transport.
Setting up the print module
CAUTION!
The label printer and the print media can be damaged by moisture and water.
Set up the print module only in a dry place protected from sprayed water.
Mount the print mechanics on a vibration-free and air draught-free.
Open cover of print module.
Remove foam transportation safeguards near the printhead.
Connecting the print module
The print module is equipped with a versatile power supply unit. The device may be operated with a mains voltage of 230 V /
50-60 Hz without any adjustments or modifications.
CAUTION!
The print module can be damaged by undefined switch-on currents.
Set de power switch to 'O' before plugging in the label printer.
Insert power cable into power connection socket.
Insert plug of power cable into a grounded electrical outlet.
Insufficient or missing grounding can cause faults during operation.
Ensure that all computers and connection cables connected to the label printer are grounded.
Connect the print module to computer or network with a suitable cable.
Initiation of the print module
Once all connections have been made:
After switching on the control unit the main menu appears which shows the printer type, current date and time.
Insert label material and transfer ribbon.
Start measuring in menu 'Label layout/Measure label'.
Press key
to finish measuring.
To enable correct measuring, at least two completed labels have to be passed through (not for continuous labels).
During measuring the label and gap length small differences can occur. Therefore the values can be set manually in the menu
'Label layout/Label and Gap'.
1 transfer ribbon roll.
Empty core, mounted on transfer ribbon rewinder.
Cleaning foil for printhead.
Documentation.
CD with printer drivers.
English
SPE
91